NB4LE-AFD
Function
NB4LE-AFD arc fault detection circuit-breaker with residual current operated function applies to circuits with frequency of 50Hz, rated voltage AC 230/240V, and rated current up to 32A. It provides overload, short circuit, leakage protection and arc fault detection, and can also be used for infrequent switching of the circuit under normal circumstances.
1.2 Selection
RCD type
Type A – Tripping is ensured for sinusoidal, alternating residual
currents as well as for pulsed DC residual currents, whether
they be quickly applied or slowly increase.
Tripping curve
B curve (I1=1.13In; I2=1.45In; I4=3In; I5=5In) protection and
control of the circuits against overloads and short-circuits;
protection for people and big length cables in TN and IT
systems.
C curve (I1=1.13In; I2=1.45In; I4=5In; I5=10In) protection and
control of the circuits against overloads and short-circuits;
protection for resistive and inductive loads with low inrush
current.
BK curve (I1=1.05In; I2=1.3In; I4=3In; I5=5In) protection and
control of the circuits against overloads and short-circuits;
protection for people and big length cables in TN and IT
systems.
CK curve (I1=1.05In; I2=1.3In; I4=5In; I5=10In)protection and
control of the circuit against overloads and short-circuits;
protection for resistive and inductive loads with low inrush
current.
​​​​​​​
1.3Â Certificates
CE, CB
Related products
-
NB1-63H Miniature Circuit Breaker
Read more.1 Function protection of circuits against short-circuit currents,protection of circuits against overload currents,switch,isolation. NB1-63H circuit-breakers are used in domestic installation, as well as in commercial and industry electrical distribution systems. 1.2 Selection Technical data of the network at the point considered:short-circuit current at the circuit-breaker installation point, which must always be less than the breaking …
-
NBP-63R Moulded Case Circuit Breaker
Read moreFunction NBP-63R is mainly used for overload and short circuit protection of power lines with AC 50/60Hz, rated voltage up to 400V and rated current up to 63A. At the same time, it can be used as an isolating switch for equipment maintenance purpose. The circuit breaker is applicable to places with high breaking …
